Orbit3 Support Pack for Windows

 
2019/05/17일자 가장 최신 Version Driver 입니다.

Ver : 1.7.5
 
신제품들 모두 호환되는 Driver 및 Demo Program 입니다.

단, PCI Card는 적용 되지 않습니다.

Orbit3 Support Pack for Windows
*********************************

----- Installation Instructions -----

Refer to the Orbit3 System Manual for more details

----- Change Log -----
1.7.5 Air Guage utility enhanced to cater for firmware update that expands mastered range.
1.7.4 WCM Configurator bug fix (overflowing number status if large preset used).
1.7.3 Improved air gauging operation.
1.7.2 Additional Air Gauge Utility features and improved operation.
1.7.1 DIOM2 Module Firmware as well as AGM Module Firmware and Configuration Utility added.
1.7.0 Ping improved, PIM support for WCM added together with documentation updates.
1.6.9 DIOM2 (DIO2 type) module support added.
1.6.8 Fix for bug found in latest ACS release, includes library update.
1.6.7 Updated firware, manuals and configuration utility for ACS - to include AIM and LE support.
1.6.6 Updated firmare to fix text overlay issue on WHT display.
1.6.5 Updated firmware for older WHT's to include the Large display source option (see V1.6.4).
1.6.4 Updated Orbit Library, Firmware and Manuals for improvements to the WCM (WHT large display source configuration & device battery status)
1.6.3 Updated Orbit System, Software & Module Manuals to improve DIOM sections.
1.6.2 Updated for bluetooth tool config via WCM.
1.6.1 Updated for Multichannel
1.6.0 Updated for USBIM Lite
1.5.9 Updated to improve installer (no longer requires .NET 3.5)
1.5.8 Updated for ETHERCAT PIM
1.5.7 Updated for DIOM input pin debounce
1.5.6 Updated for ETHERCAT PIM
1.5.5 Updated for Improve WCM Operation
1.5.4 Updated for WCM and Intellisense
1.5.3 Updated USB driver install
1.5.2 Added missing dll
1.5.1 Digital signatures added to applications and installer
1.5.0 Added Wireless Configuration Manager application and support for WIM pass code.
1.4.9 Internal version for testing.
1.4.8 Support pack updated for improved WIM operation.
1.4.7 Updates for internal orbit library changes
1.4.6 New firmware hex files for DP Probe Disconnect. Updated PIM Utility.
1.4.5 Support pack updated for improved WIM operation. Datasheet Manager application added to Orbit Suite to clarify PIM datasheets.
1.4.4 Support pack updated for improved PIM Programming.
1.4.3 Support Pack updated for New PIM Devices
1.4.2 Library updated to include ProbeDetectSupported property for digital probes (DP's).
1.4.1   Added latest firmware hex files for EIM, DIOM and wireless hand tools
1.4.0   Added dashboard containing applications to launch and to replace start menu shortcuts
1.3.19 Updated for wireless hand tools.
1.3.18 Updated for wireless hand tools.
1.3.17 Internal version for testing.
1.3.16 Improved Operation of OrbitRegistration.
1.3.15 Internal changes to improve operation.
1.3.14 Orbit Library updated to support operating system suspend / resume cycle - knock on changes in Updater, Example .NET Project and OrbMeasure Lite.
1.3.13 New firmware hex files for wireless hand tools
1.3.12 Updated Orbit Library Test Source project to remove unused reference.
1.3.11  Updated Orbit Library to add new COM interfaces
1.3.10 Updated PIM Utility, Manuals and Firmware to support all module types except DIOM
1.3.9 Orbit Library updates (Added DIOM support)
1.3.8 New firmware hex files for wireless hand tools
1.3.7 New firmware hex files for wireless hand tools
1.3.6 New OSPW installer and utilities no longer require UAC being turned down to work
1.3.5.5 Orbit Library updates (Visual C++ improvements)
1.3.5.4 Orbit Library updates (USBIM Connection improvements)
1.3.5.3 Orbit Library updates (For improved hotswap error handling)
1.3.5.2 Orbit Library updates (For MultiChannel)
1.3.5.1 Orbit Library updates (For MultiChannel)
1.3.5.0 Orbit Library updates (For USBIM Protocol) & Firmware updates
1.3.4.9 ACS Firmware Updated to change displayed status' from "RangeErr" to "Ovr/Undr" and "ProbeErr" to "No Probe".
1.3.4.8 WHT Firmware updated - hex file included for updater.
1.3.4.7 Orbit GetProbe ID command added to OrbitLibrary
1.3.4.6 Confocal Support added (updater, Firmware and manual).
1.3.4.5 PIM Utility updated, as well as PIM Firmware and ACS Firmware.
1.3.4.4 ACS Firmware update & OrbMeasureLite updated to include Inches / mm units.
1.3.4.3 Orbit Library & Orbit Library Test updated for confocal
1.3.4.2 Orbit Excel add-in now a separate install. Datasheets, user leaflets & legacy manuals removed. General Improvements to installer.
1.3.4.1 Orbit Excel add-in manual and examples added
1.3.4.0 PIM manual and utility added
1.3.3.9 Orbit library updates for Confocal.
1.3.3.8 Orbit library updates. Updated ACS firmware files
1.3.3.7 Added Wireless HandTool (WHT) firmware files
1.3.3.6 Orbit library updates
1.3.3.5 Orbit library updates
1.3.3.4 Orbit3 Support Pack for Windows
 
510414 OrbitLibrary
 Version 1.4.0.2
  AGM Module mastering update
 Version 1.4.0.1
  Added AGM Module
 Version 1.3.9.0
  DIOM2 (DIO2 type) module support added
 Version 1.3.8.2
  Improved support for ACS within the Updater.
 Version 1.3.8.1
  Improved WCM operation to add battery status to reading device channel data.
  Display large source WHT configuration option (for WCM) added.
 Version 1.3.8.0
  WCM Configurator updated to allow configuration of connected tools.
  Passcode enable / disable added for bluetooth devices.
 Version 1.3.7.1
  Updates for Multichannel
 Version 1.3.7.0
  Added USB Lite controller
 Version 1.3.6.0
  Added DIOM input debounce
 Version 1.3.5.0
  Improved WCM Operation
 Version 1.3.4.0
  Added WCM Module
 Version 1.3.3.0
  Added Wireless Security Code when connecting to WIMs.
 Version 1.3.2.0
  Improved operation with connecting to WIMs. Removed legacy pairing method.
 Version 1.3.1.0
  Internal Updates for comms
 Version 1.3.0.1
  Improved operation with connecting to WIMs.
 Version 1.3.0.0
  Added properties to access modules last readburst results from module objects.
  Internal Updates for PIM.
 Version 1.2.1.2
  Updated to support 'ProbeDisconnectSupported' property for DP's.
 version 1.2.1.1
  Updates for Wireless Hand Tool
 version 1.2.1.0
  Orbit library now includes property for 'AllowOSSuspend' which if 'false' will inhibit OS Idle-Suspend while Orbit connected.
  Orbit server also now handles a suspend / resume cycle, re-initialising all networks upon resuming.
  LEIM module reading number of decimal places fixed.
 Version 1.2.0.7
  Added COM interfaces for DefaultResolution and DefaultAveraging
 Version 1.2.0.6
  Additional support classes to improve operation with DIOMs.
 Version 1.2.0.5
  Changes to improve operation with Visual C++.
 Version 1.2.0.4
  USBIM Connection improvements.
 Version 1.2.0.3
  Updated for improved hotswap error handling.
 Version 1.2.0.2
  Updates for Multichannel
 Version 1.2.0.1
  Updates for Multichannel
 Version 1.2.0.0
  USBIM Protocol Updates
 Version 1.1.10.4
  Added GetProbeID method for retrieving module's probe identity
 Version 1.1.10.3
  Updates for confocal
 Version 1.1.10.2
  Confocal support for second channel added, confocal property getters added.
 Version 1.1.10.1
 Version 1.1.10.0
  Internal versions.
 Version 1.1.9.13
  Improved Connect and Disconnect method (mutex)
  Added Dispose method (IDisposable Interface)
 Version 1.1.9.12
  Updates for PIM
 Version 1.1.9.11
  Updates for PIM
 Version 1.1.9.10
  Updates for confocal
 Version 1.1.9.9
  Changes for old COM compatibility
 Version 1.1.9.8
  Updated to add PIM and Confocal Support.
  Load function of network configuration bug fixed so module name is updated
 Version 1.1.9.7
  Internal Release
 Version 1.1.9.6
  Updated to improve dynamic mode memory management operation
 Version 1.1.9.5
  Updated to better support VC++ 2013.
 Version 1.1.9.4
  Timing changes for software updates.
 Version 1.1.9.3
  Ethim Changes for Upgrading Ethims
 Version 1.1.9.2
  WIM Controllers added
 Version 1.1.9.0
  LT Updates
 Version 1.1.8.0
  Default resolution and averaging properties added for DP,AIM,LT,LTH
  BeamControl and BeamOn Properties added for Network,LT,LTH
 Version 1.1.7.0
  Modim Support Added.
 Version 1.1.5.5
  Fix EIM direction bug.
 Version 1.1.5.4
  Added support for the Orbit3 LTH module.
 Version 1.1.4.2
  Error codes for detachable probe status' added.
 Version 1.1.4.1
  Improved support for updating Orbit ACS units.
 Version 1.1.4.0
  Added support for Orbit 3 LE.
 Version 1.1.3.9
  Added support for updating Orbit ACS units.
 Version 1.1.2.5
  Minor Bugfixes.
 Version 1.1.1.9
  Fixed crash bug with missing FTDI dll.
 Version 1.1.1.8
  Initial Release.
 
510415 OrbitLibraryTest
 Version 1.4.4.0
  Added Air Gauge (AGM) module support
 Version 1.4.3.0
  Added DIOM2 (DIO2 type) module support
 Version 1.4.2.0
  Added MaxNumberOfModules property to Network tab
 Version 1.4.1.0
  Changed target framework to DotNET 4.0 from DotNET 3.5
 Version 1.4.0.0
  Added DIOM input pin debounce
 Version 1.3.9.0
  Improved operation with connecting to WIMs
 Version 1.3.8.0
  Updated to add LastReadBurstReading to reading user control
  Updated to add Disconnect Supported to capabilities user control
 Version 1.3.6.0
  Updates for DIOM support
 Version 1.3.5.9
  Improved operation with Windows UAC
 Version 1.3.5.8
  Updates for Multichannel
 Version 1.3.5.7
  Added GetProbeID method to Module Information User Control
 Version 1.3.5.6
  Confocal updates for averaging
 Version 1.3.5.5
  Confocal Updated for second channel reading and updates for property access.
 Version 1.3.5.4
  Added Confocal support
 Version 1.3.5.3
  Internal Release
 Version 1.3.5.2
  Added connect button for WIM
 Version 1.3.5.0
  Addition of Laser beam control and default averaging and resolution settings
 Version 1.3.3.0
  Layout Changes
 Version 1.3.2.9
  Progress bar fix
  Sample Sync radio-button fix
  ReadBurst Reading column title fix
 Version 1.3.2.8
  Initial Release
 
510416 Orbit3 Registration
 Version 1.3.0.1
  Corrected an issue with detecting multiple network cards when the default gateway is not set
 Version 1.3.0.0
  Added support for multiple network cards
  Now caters for small resolution screens
 Version 1.2.1.4
  Now runs on Dot NET 4.0 Framework
 Version 1.2.1.3
  No longer prompts for administrator
 Version 1.2.1.2
  ETHIM Updates for New MAC Range and Device IDs
 Version 1.2.1.1
  WIM Library Changes
 Version 1.2.0.0
  Added 'Connect To IP' button; allowing the configuration of ethims on different networks.
 Version 1.1.0.4
  Minor Fix
 Version 1.1.0.3
  Minor Fix
 Version 1.1.0.2
  Fixed issue with missing registry entry
 Version 1.1.0.1
  Initial Release
 
510445 OrbMeasure Lite
 Version 1.1.3.0
  Added Air Gauge (AGM) Module
 Version 1.1.2.0
  Changed target framework to DotNET 4.0 from DotNET 3.5
 Version 1.1.1.6
  Find WIMs button removed (improvement to connecting to WIMs)
 Version 1.1.1.5
  Added scroll bars to main app for support of small screens
 Version 1.1.1.4
  Updated exception handling in line with OrbitLibrary Suspend / Resume updates.
 Version 1.1.1.3
  Added "Units of Measure" menu item with mm / Inch options.
 Version 1.1.1.2
  Added "Connect Including WIMs" functionality.
 Version 1.1.1.1
  LTH Support.
 Version 1.1.0.6
  Minor Changes
 Version 1.1.0.5
  Multiple fixes; sending orbit commands, logging and switching networks.
 Version 1.1.0.4
  Initial Release.
 
510444 Orbit3 Updater
 Version 1.2.0.0
  Changed to .NET 4.0 from .NET 3.5
 Version 1.1.9.0
  Improved handling of WIM updates
 Version 1.1.8.3
  Removed "Find WIMs" button (part of WIM connect update)
 Version 1.1.8.2
  Added scroll bars to main app to support smaller screens. Improved update of WHT-M Bluetooth modules.
 Version 1.1.8.1
  Wirless handtool internal chipset programming correction.
 Version 1.1.8.0
  Improved handling of Wireless Hand Tool updates
 Version 1.1.7.0
  Internal testing only.
 Version 1.1.6.0
  Updated to inhibit Idle OS Sleep while Orbit Connected (via new Orbit Library Server property).
 Version 1.1.5.1
  Minor Update to handle Multichannel modules.
 Version 1.1.5.0
  Modified to handle Multichannel modules.
 Version 1.1.4.0
  Modified to handle confocal modules.
 Version 1.1.3.0
  Controllers with internal module now only update once.
 Version 1.1.2.0
  Added WIM controllers
 Version 1.1.2.0
  Can retry upon connection to Orbit3 Server
 Version 1.1.1.0
  Added Support for Orbit ACS Units.
 Version 1.1.0.3
  Minor change.
 Version 1.1.0.2
  Initial Release.
 
510542 Orbit3 Confocal Updater
 Version 1.0.0.3
  Added scroll bars to main app to support use on small screens
 version 1.0.0.2
  Updated to inhibit Idle OS Sleep while Orbit Connected (via new Orbit Library Server property). 
 Version 1.0.0.1
  No longer prompts for administrator
 Version 1.0.0.0
  Initial Release.
 
510442 Orbit3 C# Example
 Version 1.0.0.6
  OrbitModule WCM support added.
 Version 1.0.0.5
  Added scroll bars to main help for support of small screens
 Version 1.0.0.4
  Added exception handling to communications calls.
 Version 1.0.0.3
  Added Example of Zero function
 Version 1.0.0.2
  Minor change
 Version 1.0.0.1
  Initial Release
 
510443 Orbit3 Cpp Com Example
 Version 1.8
  Linked to latest OrbitLibrary
 Version 1.7
  OrbitModule WCM operation enhanced. Linked to latest com object.
  Exception handling added to Ping, NotifyAdd and FindHotswapped.
 Version 1.6
  OrbitModule WCM support added. Linked to latest com object.
 Version 1.5
  Linked to latest com object. No application changes
 Version 1.4
  Minor changes
 Version 1.2
  Initial Release
 
510448 Orbit3 Excel COM Example
 Version 1.2
  Minor changes
 Version 1.0
  Initial Release
 
510437 Orbit3 Reporter
 Version 1.1.1.0
  Changed target framework to DotNET 4.0 from DotNET 3.5
 Version 1.1.0.9
  Automatically connects to paired WIMs (part of WIM connect update)
 Version 1.1.0.8
  Added scroll bars to main app to support smaller screens
 Version 1.1.0.7
  WIM Support added. Corrected minor typo's
 Version 1.1.0.6
  Logo updated
 Version 1.1.0.5
  Minor Changes
 Version 1.1.0.4
  Added PatchLog.txt file dump to report
 Version 1.1.0.3
  Initial Release
 
510538 PIM Utility Software
 Version 1.0.4.0
  WCM Support added.
 Version 1.0.3.0
  Ethercat PIMS Added
 Version 1.0.2.2
  Bugfixes for setting IP Configuration
 Version 1.0.2.1
  PIM Programming improvements
 Version 1.0.2.0
  Added Generation 2 PIM for Profinet EthernetIP and ModbusTCP
 Version 1.0.1.5
  Added scroll bars to main app for support for smaller screens
 Version 1.0.1.4
  Included support for different module types including UOM parameters and appropriate scaling.
 Version 1.0.1.3
  Factory Reset now waits for device to reset (sometimes didn't work due to timing issue).
  Support for New Version Anybus Module added.
 Version 1.0.1.2
  New PIM features catered for (Factory Reset & Display Orientation) as well as display of Firmware Version.
 Version 1.0.1.1
  Minor form corrections
 Version 1.0.1.0
  Bug fixes.
 Version 1.0.0.1 - 1.0.0.9
  Internal Versions - never released
 Version 1.0.0.0
  Initial internal version
 
510496 ACS Customer Support Utility
 Version 1.0.4.0
  Modified to support ACS update where Digital output options expanded.
 Version 1.0.3.0
  Modified to allow setting of string type parameters (needed for user settable channel UOM parameters).
 Version 1.0.2.0
  Changed to .NET 4.0 from .NET 3.5
 Version 1.0.1.3
  Added scroll bars to main app to support use on small screens
 Version 1.0.1.2
  Changed saved port settings file location.
 Version 1.0.1.1
  No longer prompts for administrator.
 Version 1.0.1.0
  System number format used rather than decimal point always expected as full stop.
 Version 1.0.0.9
  Corrected minor typo's
 Version 1.0.0.8
  Added 'Full Name' to output parameter map file. Bug fixes.
 Version 1.0.0.7
  Error / exception handling improved.
 Version 1.0.0.6
  Minor bug fix.
 Version 1.0.0.5
  Rebuilt with V1.25 ACS firmware to include chart scaling menu page.
  Corrected padding of negative numbers with decimal places.
 Version 1.0.0.4
  SI400 functionality added.
 Version 1.0.0.3
  Operation improved. General bug fixes. Updated for new version of ACS.
 Version 1.0.0.2
  Operation improved. General bug fixes.
 Version 1.0.0.1
  Operation improved. General bug fixes.   
 Version 1.0.0.0
  Initial version
 
510487 Orbit3 Gateway Configurator
 Version 1.1.2.0
  Changed to .NET 4.0 from .NET 3.5
 Version 1.1.1.0
  Minor Bug fixes.
 Version 1.1.0.0
  General Bug fixes.
 Version 1.0.0.0
  Initial version
 
510409 Orbit3 Power Calculator
 Version 1.9
  PIM, AGM & DIOM2 added
 Version 1.8
  WCM added
 Version 1.7
  Removed PCI, USB(original), RS232(original), cable selection and length
 Version 1.6
  Improvements to calculations
 Version 1.5
  Confocal Added
 Version 1.4
  MODIM, WIM and SGIM added
 Version 1.3
  Orbit LT & LTH modules added
 Version 1.0 - 1.2
  Initial Release  
 
510412 RS232IM_Helper
 Version 1.5.1.0
  WIM Pass Code command added.
 Version 1.5.0.4
  Updated to use .NET framework 4.0 (originally used 3.5)
 Version 1.5.0.3
  Added scroll bars to main app for support for small screens
 Version 1.5.0.2
  Orbit GetProbeID Command added.
 Version 1.5.0.1
  Updated for Logo change
 Version 1.5.0.0
  Minor GUI Changes
 Version 1.0.0.0.to 1.4.0.0
  Internal versions - never released
  Sample Sync radio-button fix
  ReadBurst Reading column title fix
 Version 1.0.0.0
  Initial Release
 
510584 DataSheet Manager
 Version 1.0.1.0
  'Version' header corrected to 'Min Version'
 Version 1.0.0.0
  Initial Release
 
510587 Wireless Configuration Manager
 Version 1.0.1.0
  Added WMM-A Support
 Version 1.0.0.0
  Initial Release
 
 
510592 WCM_Configurator
 Version 1.0.4.0
  Floating point numbers used for retrieving readings - large presets were causing int overflow error status.
 Version 1.0.3.0
  Large display reading source configuration option added.
 Version 1.0.2.0
  Configuration of WHT, WHT-M and WMM-A via WCM added
 Version 1.0.1.0
  Initial Release
 
 
510613 Air Gauge Utility
 Version 1.0.3.0
  Extra end-bands catered for.
 Version 1.0.2.0 
  Minor usability improvements.
 Version 1.0.1.0 
  Modified to work in the UOM of the AGM and set mastering properties at Stage 5 only.
 Version 1.0.0.0
  Initial Release.